Read below to learn more and apply online.
A Sewer and Water Permit is required under the City's Safety Codes Permit Bylaw 15894 when installing, altering or relocating sewer and water equipment including:
- Sewer lines
- Storm or sanitary sewers
- Water lines
- Water connections
Effective January 1, 2020
A Sewer and Water Permit is 0.52/$1000 construction value with a minimum of $162/address or unit.
The safety code fee is 4% of the permit cost with a minimum of $4.50 and a maximum of $560.
Weeping tile can be connected to your storm sewer system, provided a connection is available. The system must run through a backwater valve that is accessible from the basement of your building.
After the work is complete, an inspection of the equipment is required.
All concealed equipment must be inspected and approved before covering.
If the work has not been inspected but has been covered, the inspector has the authority to re-open the area for inspection.
Booking an Inspection
A permit must be obtained prior to booking an inspection.
To book an inspection, contact our office.
Additional fees shall be assessed for every inspection requested where any of the following items are found to be deficient:
- No address on site, building, or suite as applicable
- Inspector unable to access the building
- Project not ready for inspection
- A previously identified deficiency has not been corrected
Completed permit application forms can be dropped off, mailed, or emailed into our office or, if you have an online account, you can apply online.