Please choose between the following three options:
Skip to main menu Skip to site search Continue to current page menu and contentMain page content begins here
Paving Operations is a seasonal program that operates between April and October, weather-dependent.
Subscribe for service notifications to know when road maintenance, such as micro-surfacing or paving, is happening in your area. Be sure to move your vehicles when ‘no parking’ signs are in your neighbourhood. You will receive your first notification:
Paving Operations performs the following types of work:
These projects consist of small collector roads, residential roads or alleys spread across the city that require maintenance paving. The intention of these projects are to extend the useful life of the road surface.
A grinder removes the top oxidized asphalt surface or top surface distresses. This allows a new asphalt surface to be installed without changing the elevation of curbs and gutters.
The new asphalt is transported by tandem trucks to the job site and is installed using the paver. Asphalt is compacted by using large steel drum and rubber tire rollers.
These initiatives involve both remedial and proactive maintenance strategies, encompassing tasks such as repairing bases, sealing cracks and patching pavement. The overarching objective of these interventions is to minimize recurring maintenance needs, uphold asset functionality and extend the pavement's lifespan.
Base repairs are performed on sections of the road where there is a failure of pavement structure. The failed area is excavated, strengthened by geogrid reinforcement, backfilled with suitable material and then capped with a new lift of asphalt.
Crack sealing serves as a proactive maintenance method to prevent moisture infiltration into the pavement elongating the asset's lifespan. This involves cutting the cracks to specified dimensions, thoroughly cleaning them and filling them with a specialized sealing material.
Patch paving is conducted in cases of widespread surface deterioration, where multiple patches in close proximity are needed, necessitating frequent maintenance. This procedure typically addresses areas with a minimum size of 3.5m x 30m. Roads undergo patch paving only if they are not slated for renewal within the next 5 years.
Step 1: Grinding Phase
This stage typically lasts 3 to 5 days as crews utilize heavy equipment to remove the surface levels of defective asphalt. 'No Parking' signs and Road Closures will be in place. Following completion of this step, a break of 1 to 2 weeks will occur. During this break, normal driving and parking conditions resume.
Step 2: Paving Phase
This process usually spans 3 to 5 days as crews replace the defective asphalt with new material using heavy equipment. 'No Parking' signs and Road Closures will be enforced. After paving is finished, normal driving and parking activities resume until the subsequent phase.
Step 3: Leveling Stage
Approximately 1 to 2 weeks after paving, crews return to adjust existing utilities such as manholes and valve vaults to ensure the new surface is level. Parking will only be affected around each utility item for a day or two.
| Telephone | In Edmonton: 311 Outside Edmonton: 780-442-5311 |
|---|
| TTY | 780-944-5555 |
|---|
